1.A connecting link of an O-ring Chain for standard application is pre-coated with grease in the pins. Ahead of connection, verify the grease around the surfaces of pins, and should the volume of grease is tiny, apply grease with bare hands. (If gloves are made use of, the grease will be absorbed by the gloves.)
Example: Once the connecting link (I) of an O-ring chain for basic application is
shipped, O-rings are fitted on the roots of the pins. When the O-rings come loose on account of vibration during transport, refit the O-rings in for the roots of the pins.
In this instance, you should definitely return the grease collected in the roots of your pins to the central surfaces of your pins, a lot more at portion A than at portions B shown inside the above illustration. (Portions A is worn due to sliding using the bushings.)
2.The chain might be most conveniently connected within the teeth of a sprocket. Engage the backlinks at both ends of your chain with all the sprocket teeth and match connecting pins. When the sprocket may be moved, the chain may also be linked about the loosened side.
3. Connecting procedure
1.Confirm that O-rings are attached to your roots of the pins.
2.In case the amount of grease applied around the connecting pins is small, coat the pins with grease at the central portions.
3.Insert the connecting pins in to the bushings of the inner backlinks at each ends.
4.Confirm that the grease is applied to the whole encounter from the O-ring, and fit the O-ring onto the connecting pins.
five.Insert the connecting pins to the connecting plate and although pressing the connecting plate, set up the spring clip. Verify regardless of whether the head (the finish without a split) of your spring clip is turned within the feeding path from the chain. (See the following illustration.)
6.Make sure you confirm the spring clip is securely fitted inside the clip grooves with the connecting pins.
This completes jointing with the connecting website link. Note that grease over the surfaces of connecting pins and O-rings may be removed through set up do the job. In this case, re-grease applying the grease about the surface of your base chain or the grease while in the polyethylene bag through which the connecting link was contained.