The Drag Chain conveyor is that transmission drives the push sprocket to rotate, conveyor chain with the scraper meshes with drive sprocket and moves appropriately when the materials is included from feed inlet, it is gained in slot, then pulling drive of conveyor chain moves in the identical path, so that the internal friction and inner stress amongst uncooked supplies increases. When the friction is higher than friction amongst the content and the groove wall, it is driven CZPT by the conveyor chain motion, and elevated inner pressure assures a secure condition in between the layers, making a steady circulation. When the ratio of the layer top meets particular conditions, transmission movement is secure and the materials velocity is about equivalent to chain speed, so materials is continually and stably transported from discharge port
| one. Digesed grains,cement and chemcial conveying. |
| two. Conveying dry powder and granular supplies (moisture≤10%). |
| three. Inclination: thirty ° ≤a≤ 90 °. |
| 4. Optimum lifting height: 30meter. |
| Design | RMC20 | RMC25 | RMC32 | RMC40 | RMC50 | RMC63 | |
| solt(MM ) | two hundred | 250 | 315 | four hundred | 500 | 630 | |
| loading depth(MM ) | 200 | 250 | 315 | 400 | five hundred | five hundred | |
| ability(T/H ) | ten-twenty | 16-32 | 32-sixty four | 55-one hundred forty | 110-220 | 175-350 | |
| chains | model | 3002H | 3002H | 3002H/3003H | 3003H | 3003H | |
| allowable load(KN) | forty.1 | 40.one | forty.one/ninety | 40.1/ninety | ninety | ninety | |
| fat(KG/M) | 16.one | 26.6 | 32.five/37.8 | 40.nine/46.three | fifty five.8 | 58.four | |
| speed(M/S ) | .sixteen-.32 | .sixteen-.32 | .2-.4 | .two-.five | .twenty five-.five | .2-.sixty three | |
China scraper chain conveyor supplier China en masse chain conveyor manufacturing unit
