Our direct supply chain to Martin Sprockets factories gets a wider range of QD Bushings delivered at the right time at the proper price.
Taper bushing are widely used together with sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are constructed with high quality engineered materials with great tolerance. The feature is usually easy to make use of and needs no extra alteration. These bushings can fit almost all types of assemblies and sizes. They are the best choice in design for mechanical connections.
No costly re-boring: complete range of both metric and imperial obtainable.
Standard range fits up to 125mm/5″ shafts & Hub diameter required depends upon the application.
Complete brief reach range available, for compact light-weight assemblies & Clean, Compact Style.
Simple installation and removal.

Our immediate supply chain to Martin Sprockets factories gets a wider range of QD Bushings delivered at the right time at the proper price.
Taper bushing are widely used as well as sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are made from high quality engineered components with great tolerance. The feature can be easy to use and needs no extra alteration. These bushings can suit almost all types of assemblies and sizes. They will be the best choice in design for mechanical connections.
No costly re-boring: full selection of both metric and imperial available.
Standard range matches up to 125mm/5″ shafts & Hub diameter required depends on the application.
Complete short reach range obtainable, for compact light-weight assemblies & Clean, Compact Style.
Simple installation and removal.
The original sheave and pulley mounting system developed to facilitate installation and replacement of components.
The QD (Quick Detachable) design offers both conventional (flange outboard) and invert (flange inboard) installation configurations.
1. Be certain the tapered cone areas of the bushing and the inside of the driven product are clean and free from anti-seize lubricants.
2. Slide QD bushing on shaft, flange end first. Assemble key.
3. Position QD bushing on shaft. Tighten arranged screw over key “hands tight” with regular Allen wrench only. Usually do not use excessive force.
4. Slide huge end of sheave or sprocket taper bore into position over cone aligning drilled bolt holes in sheave or sprocket with tapped holes in flange of bushing. Assemble pull-up bolts and lock washers.
Notice: Install M thru S bushings in the hub so that the two extra holes in the hub can be found as far as feasible from the bushing’s saw cut.
5. Tighten pull-up bolts alternately and evenly to tightness indicated in torque desk on back. Usually do not use extensions on wrench handles. There must be a gap between your encounter of the sheave or sprocket hub and the flange of the QD bushing to insure a satisfactory cone hold and press fit.
CAUTION: THIS GAP SHOULD NOT BE CLOSED.
Use a tapered or QD bushing from Ever-Power with sheaves, pulleys, sprockets and many other power transmitting applications. Flanged quick-disconnect bushings feature a completely split style to help provide easy set up and disassembly. A tapered bushing with straight edges uses an interior screw to greatly help drive the bushing in to the shaft, while a split taper has a flange and an integral on the bushing to help provide more drive.
QD bushings (” and metric sizes) have a flanged design and feature a 4° taper with standard or reverse installation. They are stocked in well-known finished bore sizes and minimum plain bore for custom reboring.
Many people make reference to both types as a “taper lock” because they both utilize the tapered wedging action to lock to the shaft. The taper bushing, with it’s straight sides, uses a set screw to drive the bushing in to the bore of the component being installed (sheave, sprocket, etc.). Be cautious when installing these screws. The holes with threads on the bushing are for removal just. Also remember that the looks of a flange externally of the bushing doesn’t indicate it’s a QD design. Split Taper bushing also offers a flange, and both are not interchangeable. The QD design includes a split that continues through the flange. The Metal QD (Quick Disconnect) Type bushing offers versatile and easy set up while providing exceptional holding power. QD Bushings are utilized thought out the industry offering convenience and design flexibility. They are precision machined of quality Metal and are installed by tightening several cap screws. This draws the bushing in to the taper bore of the product which compresses the bore of the bushing. QD bushings are easily removed utilizing the cap screws as jack-screws. Dual drilled holes are furnished in QD Bushings permitting installation of product in the traditional or reverse positions. This allows cap screws to become installed through product hub or bushing flange whichever is definitely most convenient. A significant benefit in set up, cap screws are at all times inserted from the outside where they are often accessible. QD Bushings can be found from share with all popular bores within the range of every size bushing.
QD Bushings feature a split tapered flange with the split central to the flange and taper. They are used on sprockets, sheaves, and pulleys where more clamping push is required over standard bored-to-size bushings. Quick-Disconnect Bushings are crucial for mounting v-belt drives, synchronous belt drives and roller chain drives.