Single and dual reduction planetary equipment drives to be used with electric, hydraulic, atmosphere motors or mechanical power insight from high hydraulic planetary drive acceleration, low torque sources to provide reduced speeds at increased torques. The input side has standard SAE pads for electric motor mounting. Available in the three output configurations demonstrated below. Many units could be furnished with an intrinsic parking brake.
Solitary reduction drives are limited by 3500 RPM input; double reduction drives to 5000 RPM. Units with integral parking input swiftness is limited to 2500 RPM.The same torque is available in either direction of rotation. Torque rankings are intermittent. For continuous operation reduce torque ratings to about 1/3 to 1/2 the values shown. Products provide 95% power transmitting efficiency.

Wheel Drive
Input side has regular SAE pads and splined insight. Output aspect has hub for installation vehicle wheel. Free wheel can be done by using the springtime disconnect to disengage the drive shaft. The disengage feature is regular on all wheel drives.

Shaft Output
Input side standard SAE pads with splined input. Output side choices include: Keyed circular, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is standard SAE pads with splined insight. Output side has a flanged spindle for coupling to the load.

Swing Drives
Ever-Power model 6 emerges with or without essential parking brakes. The “SW” Power Wheel provides extra-huge tapered roller bearings, a ductile iron hub and temperature treated ring equipment to minimize backlash growth due to wear. The exterior bearing nut provides the ultimate in shaft retention and shaft power. Output can be a spindle shaft or numerous sizes of essential pinion gears.