The EP Greenhouse gear reducer is a concise and lightweight reduction gearbox with a built-in limit switch system that’s suitable for assembly of a locally available electric electric motor. The reducer is utilized in manually-managed or climate-managed ventilation and display systems in greenhouses. The quick and easy-to-install EP reducer is certainly rainproof and windproof. The gear reducer includes a high protection class (IP65) and can be used within an ambient temperature of 0-60 °C.

The low-noise geared motor for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmission means that the drive shaft is usually locked when the reduction gear driver isn’t running. The completely sealed reduction gear reducer comes with an growth chamber with a diaphragm to keep the gear essential oil at a low pressure under all circumstances, even at high temperatures. Thanks to the use of an expansion chamber, the reducer can be installed in any position. There are no restrictions, since there is no need for a bleed plug. The sealed reduction gear motor keeps the apparatus oil of the gearbox in optimal condition for its entire operating life time. The gear driver is ideal for discontinuous use, working course s3-30%, with a maximum activation period of 25 minutes.

The Gear box reduction gear reducer comes with an FT85 motor assembly flange, on to which the right IEC standard motor can simply be installed (EN 50347).

The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit change system is installed within an integrated chamber and is definitely enclosed by an impact-resistant plastic material cover. The limit switch system is obtainable and simple to adjust. The limit switch system’s optimum switching range is certainly 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The gear motor comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The gear driver for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.

Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of software of 4-pole electric motor.
Protection class IP65.
May be used in ambient temps of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, optimum activation time 25 mins.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC regular motor (EN 50347).
Maximum switching selection of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).