• Motor gearboxes are maintenance-free, compact power sources for driving vent, display, home and flap ventilation systems in greenhouses.
• Single phase and 3 phase choices for your individual needs.
• Key feature of these drives certainly are a self-braking worm gear transmission and an integral linear limit switch unit.
shaft-installed gear motors are complete electromechanical drives in which the speed of the installed electric motor is decreased to the required value using two to four reduction stages. The drives are high performance and durable and feature a compact and lightweight design.

The compact design is made possible through the mixture of a spur/worm gear drive with motors optimized for performance. motors also feature a 60 to 70 percent weight reduction compared to commercially obtainable drive motors. This is achieved through the constant application of aluminum die casting technology, which ensures a high degree of rigidity for the gear and motor housing at the same time.

Each drive is produced and tested specifically for every order and customer. A sophisticated modular system permits an excellent diversity of types and a optimum amount of customization to consumer requirements.

Thanks to their integrated control units, the shaft-mounted equipment motors are the ideal drives for applications in reversing setting. In both rotation directions, defined end positions are guarded by two placement limit switches. This uncomplicated answer does not just simplify the cabling, but also makes it possible to configure the finish positions quickly and easily. The high shut-off accuracy of the limit switches guarantees safe operation shifting forwards and backwards.
This gearmotor integrates a gearbox, an electric motor, and limit switches. It really is connected with a steel shaft to carefully turn the pinions for greenhouse ventilation. With the support of electric panel, it could run and then stop after set number of turns. Then it can open up and close the home windows for greenhouse ventilation to right positions.
To maintain the delicate environment inside a greenhouse, environment control systems certainly are a necessity. Several mechanical systems could be applied in this respect; however cup vent drive systems have a tendency to be the most popular. The drive system includes a central gearmotor linked to a 40:1 correct angle reducer with dual result shafts. These OP shafts connect to long jack shafts that spread across the roof type of the greenhouse connecting to multiple rack and pinion mechanisms that open and close large glass windowpane panes in the ceiling for temperature control.
According to the size of the application (amount of the shafting, quantity and weight of the window panes) we provides two gearmotor solutions from a modified version of their 200 Greenhouse Gear Motor series parallel shaft collection – 1/5 HP and 1/20 HP. The application form Is generally intermittent in use; nevertheless the motors are ranked continuous because the glass pane windows may potentially be under constant, subtle adjustment throughout the day.
Gear Motor, also called Motor Gearboxes, is a specific kind of electrical motor that is designed to create high torque while maintaining a low horsepower, or low quickness, motor output. Gear motors are available in many different applications, especially for the greenhouse, livestock and agricultural sector, our motors can be found options to operate roof vents, wall structure vents,roof shading and screening, they attach to the shaft with chain couplings that compensate for alignment mistakes and can be quickly removed without disturbing the entire shaft.
shaft-installed gear motors are complete electromechanical drives where the speed of the installed electrical motor is decreased to the desired value using two to four reduction stages. The drives are high performance and durable and show a compact and lightweight design.