Element I: Solution INTRODUCTION
1. Commodity: E235 Chilly drawn seamless steel tube
two. Measurement variety: 40mm*30mm-325mm*300mm,wall thickness not limited.
3. Offered steel grade:
| SAE/AISI: | 1571,1571,1026,1045,1518,1524,1541,4130,4140,4145,4340,8620 |
| DIN: | ST35,ST45,ST52, ST52.3, ST52.four |
| EN: | E195,E235,E355, C45E, 25CrMo4, 42CrMo4, CK45, S45C, E410, E470 |
| JIS: | STKM 13A,STKM 13B,STKM 13C |
| GB: | twenty#, 45#, 16Mn, Q345B, Q345C, Q345D, Q345E, 25Mn, 27SiMn, |
4. Manufacture strategy: Chilly rolled, hydraulic chilly drawn, very hot rolled+deep hole uninteresting
5. Shipping and delivery issue:
| BK | BKW | BKS | GBK | NBK | Q+T |
| +C | +LC | +SR | +A | +N | |
| Chilly rolled | Cold drawn | Stress relieved | Annealed | Normalized | Quenched+Tempered |
six. ID Tolerance: as per ask for.
7. Finish finish: Plain ends with square cuts, free of charge of burrs for honed tubes. Tiny bevelled ends for skived&roller burnished tubes.
8. CZPT export packing: In bundles tied with metal strips. Int&ext oil coating. Finish plastic caps. Exterior packing by PVC bags and knit bags.
9. CZPTized packing and marking can be supplied on ask for.
Chilly DRAWN SEAMLESS TUBES – Anxiety RELIEVED Without OIL COATING:
Chilly DRAWN SEAMLESS TUBE-ANNEALED AND OIL COATIED&PACKED:
Cold DRAWN SEAMLESS TUBE-ANNEALED AND EXTERNALLY POLISHED:
Chilly DRAWN SEAMLESS ALLOY Steel MECHANICAL TUBINGS, QUENCHED+TEMPERED:
Component II: Often Asked Concerns
one. MOQ: CZPTly Min Buy Quantity can be two-3 tons/dimension for tubes with OD below 250mm, and 10 tons/size for tubes with OD above 250mm. Often, it relies upon on metal grade you need to have. If you want unique grade like E410, E470 or alloy metal tube, MOQ need to be ten tons/dimensions at the very least.
2. Supply Time: 20-30 times dependent on requested sizes and quantities.
3. Warranty&Assure: Guarantee&guarantee interval is 6 months given that we deliver the tubes, and we are not accountable for quality problem caused by incorrect unloading or storage after cargo. We welcome customer’s inspection prior to cargo.
four. Payment Method: We accept payment method like T/T, L/C, or D/P, but it is dependent on our investigation about customers. We have a solution to consider the credit of buyers from all over the entire world, and time and volume of D/P we can launch is established by the evaluation.
5. High quality Management: ninety% of the tubes are made from scorching rolled seamless pipes. So, top quality of uncooked substance established quality of completed tubes. We acquire uncooked content from secure suppliers who are foremost steel mills, and we examine the uncooked substance as per the requirements. In the course of our creation treatment, there is inspection and high quality control in every phase.
Component III: Business INTRODUCTION
We are a manufacturer of cold drawn, cold rolled, and hydraulic cold drawn metal tubes with OD upto 356mm because 2002. Covering an spot of about 32000M2, we have twelve standard workshops with 2 hydraulic cold drawing benches, 4 chain cold drawing benches, and 2 ERW mills. Our amenities covers all the creation techniques from pickling, chilly drawing, heat managing, observed chopping, straightening, inspection, packing to even more machining &turning, chilly drawing die fabrication, and tools repairation&servicing.
Manufacturing facility Look:
Raw Material Stock:
HYDRAULIC Chilly DRAWING BENCH:
Saw Cutting:
STRAIGHTENING:
LATHES:
HONING:
SKIVING&ROLLER BURNISHING:
