Any harm to the teeth surfaces of the sprocket diminishes the lifestyle from the conveyor chain.
With typical sprockets, significantly worn sprocket teeth have been repaired by teeth padding or the whole sprocket was replaced. In either case, repair was costly and with teeth padding, accuracy was impaired. We designed new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our consumers to the dramatic financial savings in cost and time.
The teeth is usually replaced by two methods: individual tooth replacement or sectional teeth replacement.
The bolts and nuts utilised for mounting the teeth on to your sprocket are spot-welded to prevent loosening.
The respective structures are illustrated around the proper.
The above photograph and the prime ideal illustration display a sprocket for individual tooth substitute. Because the joint encounter involving the replaced teeth plus the sprocket is formed in the exclusive arc, the bonding accuracy is higher along with the sprocket strength is enhanced. Moreover, since the load acting about the mounting bolts is decreased, there exists significantly less likelihood of loosening. This sprocket construction is patented.
You’ll find two kinds of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are made use of for massive sprockets obtaining heavy loads and welded sheet steel hubs for other applications.